Ejector Pins

All kinds of Ejector Pins can be easily grabbed with us. In addition to this, we also bring different kinds of piercing punches which are far-famed for their durability. We are a famous ejector pins exporter, based in India. We strictly use top quality raw material in the entire manufacturing process.

(Manufactured as per DIN 1530-1972) They are manufactured from suitable selected alloy steel, Hot Die Steel (HDS) and Hot work tool steel; depending on customer's requirements. They are heat treated, tempered and precision ground to very close tolerances under strict quality control. The length of the ejector pin should be selected to suit particular mold or die. Ejector pins are manufactured from H.C.H.Cr. material, are hardened and tempered to 62±2 Rc. Hot work tool steel pins are hardened to 45±5 Rc., which can be further Nitrided to attain surface hardness of 68 Rc.

Stock Length upto 100MM. Any Alternative Dimensions to the above can be Specified:-

Shank Size C	Head Dia B	Head Thk E
1.0 - 1.1	1.8	0.5
1.15 - 1.3	2.0	0.5
1.35 - 1.5	2.2	0.5
1.55 - 1.7	2.5	0.5
1.75 - 1.9	2.8	0.5
1.95 - 2.0	3.0	0.5
2.05 - 2.2	3.2	0.5
2.25 - 2.5	3.5	0.5
2.55 - 2.95	4.0	0.5
3.0 - 3.4	4.5	0.5
3.5 - 3.9	5.0	0.5
4.0 - 4.4	5.5	0.5
4.5 - 4.9	6.0	0.5
5.0 - 5.4	6.5	0.5
5.5 - 5.9	7.0	0.5
6.0 - 6.4	8.0	0.5
6.5 - 7.4	9.0	0.5
7.5 - 8.4	10.0	1.0
8.5 - 9.4	11.0	1.0
9.5 - 10.4	12.0	1.0
10.5 - 11.4	13.0	1.0
11.5 - 14.0	14.0	1.0
12.5 - 13.4	15.0	1.0
13.5 - 14.4	16.0	1.0
14.5 - 15.4	17.0	1.0

To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.

Blank Pin Zoom {+}

A Type Pin Zoom {+}

C Type Pin Zoom {+}

C Type Ejector Pin Zoom {+}

D Type Pin Zoom {+}

D Type Pierecing Punches Zoom {+}

Select and click

Select All   |   Clear All