Our product ambit is endless and starts from Polyurethane Elastomer and puelastomer etc. we never compromise for quality. Our quality control measure makes our product unique and helps us to cop up with challenging market demands. We supply you polyurethane elastomer, puelastomer and plastic polyurethane in given time period with exclusive packaging. We ensure you the highest level of satisfaction through our quality and prices which is simply unmatched with others. Last but not the least we are one of the unique supplier among plastic polyurethane elastomer suppliers in India.
Polyurethane Elastomers P.U, Rods & Mats
Polyurethane is a new wonder material which combines the strength of plastic and elasticity of rubber. P.U. can sustain very high loads at higher hardness than rubber. Unlike rubber it does not take part in weathering or chemical actions under normal condition and does not disintegrate easily. Life expectancy is very high. Because of these exceptional properties Polyurethane Springs and pads are ideally suited Press Tools, Jigs, Fixtures, Conveyors, Machine Tools etc. where the action of stripping , forming, damping cushioning, resting or rolling are involved. For optimum performance , best results and longer life, selection of variety of applications.
Polyurethane Springs : Polyurethane Springs are available in Tubular as well as Rod form. The dimensional Ø16mm to Ø120mm. These are standard internal diameters, selected taking proper care of section area for maximum load bearing capacity.
Pads/Mats : The Pads and Mats are available in standard size where thickness ranges from 3mm to 40mm. Minimum size available in any thickness is 250mm x 250mm.
TPP Strippers : Turret Punch Press Strippers are used as strippers in high speed presses where the speed is 120 strokes/min. The high resilience of the material is made use of in this application.
Polyurethane Pads Used For Forming Application :
To enquire about the desired product(s), just check the box and then click “Enquiry Now” button which is provided below.
|Hardness (Shore A) ||90+/-4|
|Specific Gravity ||1.3|
|Ultimate Tensile Strength||4500 psi|
|Tear Strength||75 lb/inch |
|NBS abrasion index||175 % |
|Max Compressibility||40 %|
|Ultimate Elongation||450 % |
|Compression Set (%), (After 22 Hrs. at 700C)||Max. 28%|
|Compression Modulus ||95 Kg/cm2 |
|Rebound resilience||45% |